Audi S3 2019 8v 2.0T(EA888 GEN3) modified carbon fiber rear difuser and rear spoiler.

Audi S3 2019 8v 2.0T(EA888 GEN3) modified carbon fiber rear difuser and rear spoiler.

Brand: Audi;

Model: S3 (8V);

Engine: 2.0t (ea888gen3);

Year: 2019;

Project: modification

The weight of genuine carbon fiber is very light, all of which are made of carbon fiber, which is different from that in the market where the surface is covered with a layer of carbon fiber stickers. The visual effect of genuine carbon fiber is very gorgeous, and the quality is also very good. With the yellow body, it forms a strong contrast with the carbon fiber ornaments, and it is full of fighting sense. The owner specially chooses the rear lip with lights, and the power supply is connected to the rear taillights, which can realize two bright spot modes: 1. Turn on the small lights, and 2. Step on the brake lights. In the previous case, only the rear lip was changed. This time, it was modified together with the tail lip and pasted on the trunk with 3M glue. The small tail of the original car did not need to be removed.

The rear diffuser lip tail of "Karbel" true carbon fiber tape lamp is made of all-carbon fiber, and is made of pre-impregnated carbon fiber cloth. Hot press molding process with autoclave; The surface texture is regular, and the product strength is 2-3 times higher than that of steel.

The original rear lip of the car is all fastened with a buckle, and the disassembly is also very convenient. Be careful, don't break the buckle, you can keep it and change it back when you recover the car later.

After removal, you need to clean the dust and stains of the rear bar, and then install a new carbon fiber rear lip.

The carbon fiber rear diffuser of "Karbel" is installed in the same way as the rear lip of the original car, all of which are fixed by buckles without nailing.

Use tail 3M glue to directly paste on the trunk. The small tail of the original car does not need to be removed.

The multimeter is used to measure the voltage, and the power supply of the rear lip lamp is connected to the circuit of the tail lamp, which can realize two bright spot modes: 1. Turn on the small lamp, and 2. Turn on the brake lamp.